LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Sensor Replacement (With HP4) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. - Radiator Surge Tank Replacement (LTG) , or Radiator Surge Tank Replacement (LKN) , or Radiator Surge Tank Replacement (LFV)
  2. Disconnect the brake fluid level sensor electrical connector.
  3. Using an appropriate tool, lift upward to release the brake fluid level sensor locking tab.
  4. GM4320385Courtesy of GENERAL MOTORS COMPANY

    Brake Fluid Level Sensor (1) - Remove