LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> 3rd Row Seat Cushion Frame Replacement (40%)

3rd Row Seat Cushion Frame Replacement (40%)

Fig 1: 3rd Row Seat Cushion Frame (40%)
GM3647751Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the 40% 3rd row seat back cover and pad. Refer to 3rd Row Seat Back Cover and Pad Replacement (40%) .
  2. Remove the 40% 3rd row seat cushion cover and pad. Refer to 3rd Row Seat Cushion Cover and Pad Replacement (40%) .
  3. Remove the 3rd row seat back hinge finish cover for the 40% seat. Refer to 3rd Row Seat Back Hinge Finish Cover Replacement (40% Inboard with AS8) 3rd Row Seat Back Hinge Finish Cover Replacement (40% Outboard with AS8) 3rd Row Seat Back Hinge Finish Cover Replacement (40% Outboard with ARN) 3rd Row Seat Back Hinge Finish Cover Replacement (40% Inboard with ARN) .
  4. Remove the 40% 3rd row seat back pivot actuator motor, if equipped. Refer to 3rd Row Seat Back Pivot Actuator Motor Replacement - Back Cushion .
1 3rd Row Seat Cushion Frame Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
45 N.m (33 lb ft)
2 3rd Row Seat Cushion Frame

Procedure

  1. Disconnect and unclip the electrical harnesses as necessary.
  2. Disconnect and unclip the seat back latch cables from the seat frame.
  3. Transfer parts as necessary.
scientia non olet · About LEMON Manuals