LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Cooling System) >> Repair Instructions >> Water Outlet Replacement (L5Q) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the engine coolant air bleed hose. Refer to Engine Coolant Air Bleed Hose Replacement .
  3. Remove the heater inlet hose. Refer to Heater Inlet Hose Replacement .
  4. Remove the heater outlet hose. Refer to Heater Outlet Hose Replacement .
  5. Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement .
  6. Remove the thermostat bypass hose. Refer to Thermostat Bypass Hose Replacement (L5Q) .
  7. Disconnect the wiring harness plug (1).
    Fig 1: Wiring Harness Plug And Water Outlet Bolts
    GM3682491Courtesy of GENERAL MOTORS COMPANY
  8. Remove the 2 water outlet bolts (4).
  9. Remove the water outlet (2).
  10. Remove and DISCARD the water outlet gasket (3).
scientia non olet · About LEMON Manuals