Radiator Inlet Hose Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Inlet Hose

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Open the hood. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Drain the cooling system. Refer to Cooling System Draining and Filling .
1	Radiator Inlet Hose Clamp (Qty: 2) Procedure Disconnect the engine cooler fan assembly electrical connector. Loosen the radiator inlet hose clamp.
2	Radiator Inlet Hose

Callout

Component Name

Preliminary Procedures

Open the hood.
Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Drain the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Clamp (Qty: 2)

Procedure

Disconnect the engine cooler fan assembly electrical connector.
Loosen the radiator inlet hose clamp.

Radiator Inlet Hose