Front Fender Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the headlamp. Refer to Headlamp Replacement (Projection/SBV)Headlamp Replacement (BASE/SBM) . Remove the front bumper fascia guide. Refer to Front Bumper Fascia Guide Replacement . Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement . Remove the body side upper front applique. Refer to Body Side Upper Front Applique Replacement .
1	Front Fender Screw (Qty: 7) CAUTION: Refer to Fastener Caution . Tighten 7.5 N.m (66 lb in)
2	Front Fender Nut Tighten 7.5 N.m (66 lb in)
3	Front Fender