Transmission Control Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Transmission Control Fasteners And Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove Front Floor Console Extension Panel (Qty: 2)Front Floor Console Extension Panel Replacement Front Floor Console Replacement (Base)Front Floor Console Replacement (Up Level) Disconnect Range Selector Lever Cable@Transmission Control Range Selector Lever Cable Replacement
1	Transmission Control Fastener (Qty: 3) CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Transmission Control Procedure Disconnect the electrical connector. Unclip Wiring Harness Retainer After installation is completed carry out a range selector lever cable adjustment. Range Selector Lever Cable Adjustment
3	Transmission Control Nut (Qty: 3) Tighten 9 N.m (80 lb in) Procedure Transfer components as necessary.