LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> SS Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Cover and Pad Replacement (Split Folding Side Cushion) >> Installation Procedure

Installation Procedure

  1. Turn the rear centre seat over.
    2. NOTE:

    When installing the rear seat cover, pull the cover tight in all corners to ensure no lumps will occur.

  2. Install the rear centre seat cover to the seat pad and frame, listen for audible clicks to confirm fitting.
  3. Turn the rear centre seat over.
  4. Press down firmly on the seat pad channels to ensure a smooth finish to the cover.
  5. Install the rear seat back. Refer to Rear Seat Back Cushion Removal and Installation (Split Folding Side Cushion Sedan) Rear Seat Back Cushion Removal and Installation (Split Folding Center Cushion Sedan) Rear Seat Back Cushion Removal and Installation (Fixed Back) .
  6. Install the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
scientia non olet · About LEMON Manuals