Rear Seat Back Cushion Removal and Installation (Fixed Back)

Fig 1: Rear Seat Back Cushion (Fixed Back)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
1	Rear Seat Back Cushion Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 30 N.m (22 lb ft)
2	Rear Seat Back Cushion Retainer Procedure Move the rear outboard shoulder belts from the shoulder belt bezel and position it out of the way, if equipped. Pull the seat back cushion upward to remove from the rear window shelf slots.
3	Rear Seat Back Cushion Assembly Procedure With the aid of a assistant remove the rear seat back cushion from the vehicle.