LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Cooling System) >> Repair Instructions >> Water Outlet Replacement (LUV) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement .
  3. Remove the engine coolant air bleed hose from the water outlet. Refer to Engine Coolant Air Bleed Hose Replacement (LUV) .
  4. Remove the heater inlet hose from the water outlet. Refer to Heater Inlet Hose Replacement (LUV) .
  5. Remove the radiator inlet hose from the water outlet. Refer to Radiator Inlet Hose Replacement (LUV) .
  6. Remove the engine oil cooler coolant inlet hose from the water outlet. Refer to Engine Oil Cooler Coolant Inlet Hose Replacement (LUJ) .
  7. Disconnect the engine coolant temperature sensor (water outlet) wiring harness connector.
    8. Fig 1: Water Outlet
    GM2192300Courtesy of GENERAL MOTORS COMPANY
  8. Remove the 3 water outlet bolts (3).
  9. Remove the water outlet (2) and the water outlet seal ring (1).
scientia non olet · About LEMON Manuals