Front Seat Cushion Cover and Pad Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Cushion Cover And Pad

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation . Remove the driver or passenger seat cushion outer finish panel. Refer to Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Manual) Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Power) . Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Driver) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger Outboard with AG5) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger Inboard with AG5)
1	Front Seat Cushion Cover Procedure Disengage the J-channel and hog ring retainers from the seat cushion frame. Disconnect the electrical connectors that attach to the seat cushion, if equipped. Remove the seat cushion cover and pad from the seat cushion frame as an assembly. Separate the seat cushion from the seat cushion pad by pulling the cover away from the pad.
2	Front Seat Cushion Pad NOTE: The seat belt presence sensor and heat mat, if equipped are integral parts of the seat cushion pad.

Callout

Component Name

WARNING:

Refer to SIR Warning .

Preliminary Procedure

Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .
Remove the driver or passenger seat cushion outer finish panel. Refer to Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Manual) Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Power) .
Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Driver) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger Outboard with AG5) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (Passenger Inboard with AG5)

Front Seat Cushion Cover

Procedure

Disengage the J-channel and hog ring retainers from the seat cushion frame.
Disconnect the electrical connectors that attach to the seat cushion, if equipped.
Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
Separate the seat cushion from the seat cushion pad by pulling the cover away from the pad.

Front Seat Cushion Pad

NOTE:

The seat belt presence sensor and heat mat, if equipped are integral parts of the seat cushion pad.