LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Accessory Trim Plate Replacement (Cadillac)

Instrument Panel Accessory Trim Plate Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Accessory Trim Plate (Cadillac)
GM1702505Courtesy of GENERAL MOTORS CORP.
Instrument Panel Accessory Trim Plate Replacement (Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the instrument panel center trim plate. Refer to Instrument Panel Center Trim Panel Replacement (Cadillac) , Instrument Panel Center Trim Panel Replacement (Except Cadillac) .
  2. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Except Cadillac) , Floor Console Bezel Replacement (Cadillac) .
1 Instrument Panel Accessory Trim Panel
  1. Disconnect the electrical connections.
  2. If replacing the accessory trim plate transfer all necessary components.
2 Retainer Clips (Qty: 6)