Repair Procedures
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
- Brake Pedal Position Sensor Replacement
- High Mount Stop Lamp Replacement
- Relay Replacement (Attached to Wire Harness) or Relay Replacement (Within an Electrical Center)
- Tail Lamp Replacement (Chevrolet Coupe) or Tail Lamp Replacement (Chevrolet, Pontiac Sedan) or Tail Lamp Replacement (Chevrolet European)
- Control Module References for BCM replacement, setup, and programming