Section 388 (Automatic Transmission - 6T30 (MH9) Or 6T40 (MH8) - Repair Instructions - Off Vehicle)
WARNING: This page is about a different car, the 2014 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions - Off Vehicle
- Lift Plate and Holding Fixture Installation
- Torque Converter Removal
- Control Valve Body Assembly Removal
- Input and Output Speed Sensor Removal
- Torque Converter Housing with Fluid Pump Assembly Removal (Non Hybrid)
- Differential Carrier Removal (6T40/45/50)
- Differential Carrier Removal (6T30)
- Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T40/45/50)
- Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T30)
- Internal Components Removal
- 2-6 Clutch Piston Removal
- Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal
- Manual Shift Shaft Seal Removal
- Input Shaft Support Replacement (Gen 1)
- Input Shaft Support Replacement (Gen 2)
- 3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement (Gen 1)
- 3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement (Gen 2)
- Front Wheel Drive Shaft Seal Replacement - Case Side
- Transmission Case Cleaning and Inspection
- Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation
- Manual Shift Shaft Seal Installation
- 2-6 Clutch Piston Installation (6T30)
- 2-6 Clutch Piston Installation (6T40/45/50)
- Low and Reverse and 1-2-3-4 Clutch Housing, Low and Reverse Clutch Assembly, Output Sun Gear, and 2-6 Clutch Plate Disassemble (Gen 1)
- Low and Reverse and 1-2-3-4 Clutch Housing, Low and Reverse Clutch Assembly, Output Sun Gear, and 2-6 Clutch Plate Disassemble (Gen 2)
- Input, Reaction, and Output Carrier Disassemble
- 3-5-Reverse and 4-5-6 Clutch Housing Disassemble (6T30/40/45/50 - Gen 1)
- 3-5-Reverse and 4-5-6 Clutch Housing Disassemble (6T30/40/45/50 - Gen 2)
- 3-5-Reverse and 4-5-6 Clutch Housing Assemble (6T30/40/45/50 - Gen 1)
- 3-5-Reverse and 4-5-6 Clutch Housing Assemble (6T30/40/45/50 - Gen 2)
- Input, Reaction, and Output Carrier Assemble (Gen 1)
- Input, Reaction, and Output Carrier Assemble (Gen 2)
- 3-5-Reverse and 4-5-6 Clutch Housing, and Input, Reaction, and Output Carrier Installation
- Low and Reverse Clutch Assembly and Low and Reverse Clutch Plate Installation
- Low and Reverse and 1-2-3-4 Clutch Housing Disassemble
- Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection
- Low and Reverse and 1-2-3-4 Clutch Housing Assemble (6T40/45/50)
- Low and Reverse and 1-2-3-4 Clutch Housing Assemble (6T30)
- Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate Installation (6T40/45/50)
- Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate Installation (6T30)
- Drive Sprocket, Driven Sprocket, and Drive Link Cleaning and Inspection
- Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T40/45/50)
- Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T30)
- Front Differential Carrier Cleaning and Inspection
- Front Differential Carrier Installation (6T40/45/50)
- Front Differential Carrier Installation (6T30)
- Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential Ring Gear Removal (6T40/45)
- Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential Ring Gear Removal (6T30)
- Front Wheel Drive Shaft Seal Replacement - Torque Converter Housing Side
- Torque Converter Housing Cleaning and Inspection
- Transmission Fluid Pump Disassemble (6T40/45/50)
- Transmission Fluid Pump Disassemble (6T30)
- Fluid Pump Selective Measurement
- Transmission Fluid Pump Assemble (6T40/45/50)
- Transmission Fluid Pump Assemble (6T30)
- Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential Ring Gear Installation (6T40/45)
- Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential Ring Gear Installation (6T30)
- Torque Converter Housing with Fluid Pump Assembly Installation (6T40/6T45/6T50 Non Hybrid)
- Torque Converter Housing with Fluid Pump Assembly Installation (6T30)
- Input and Output Speed Sensor Installation
- Control Valve Body Assembly Disassemble (Gen 1)
- Control Valve Body Assembly Disassemble (Gen 2)
- Control Valve Body Cleaning and Inspection (Gen 1)
- Control Valve Body Cleaning and Inspection (Gen 2)
- Control Valve Channel Plate Cleaning and Inspection (6T30/40/45/50 - Gen 1)
- Control Valve Channel Plate Cleaning and Inspection (6T30/40/45/50 - Gen 2)
- Control Valve Body Assembly Assemble (Gen 1)
- Control Valve Body Assembly Assemble (Gen 2)
- Control Valve Body Assembly Installation
- Control Solenoid Valve and Transmission Control Module Assembly Installation
- Control Valve Body Cover Installation
- Torque Converter Fluid Seal Replacement
- Torque Converter Installation
- Lift Plate and Holding Fixture Removal