Control Valve Body Cover Installation
WARNING: This page is about a different car, the 2014 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Body Cover Installation
| Callout | Component Name |
|---|---|
| 1 | Input Speed Sensor Connector |
| 2 | Output Speed Sensor Connector |
| 3 | Shift Position Switch Connector |
| 4 | Control Valve Body Cover Wiring Connector Hole Seal
NOTE:
Do not re-use the valve body cover wiring connector hole seal. |
| 5 | Control Valve Body Cover Gasket
NOTE:
Do not re-use the valve body cover gasket. |
| 6 | Control Valve Body Cover |
| 7 | Control Valve Body Cover Bolts M6 x 30 (Qty: 13)
CAUTION:
Refer to Fastener Caution . Tighten 12 N.m (106 lb in) |