LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Latch Replacement (40%) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Latch Components (With 40 Percent Seat)
    GM1863869Courtesy of GENERAL MOTORS COMPANY
  1. Remove the rear seat from the vehicle. Refer to Rear Seat Removal and Installation (40%) .
  2. Remove the rear seat cushion outboard trim panel. Refer to Rear Seat Cushion Trim Panel Assembly Replacement - Outboard (40%) .
  3. Remove the rear seat cushion inboard trim panel. Refer to Rear Seat Cushion Trim Panel Assembly Replacement - Inboard (40%) .
  4. Remove the rear seat cushion cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement (40%) .
  5. Remove the rear seat latch outer covers (1, 8).
  6. Remove the rear seat latch upper bolts (2, 7).
  7. Remove the rear seat latch inner covers (4, 5).
  8. Remove the rear seat latch lower bolts (9, 10).
  9. Disconnect the rear seat latch cables from the rear seat latches.
scientia non olet · About LEMON Manuals