Instrument Panel (I/P) Upper Trim Pad Replacement - (Monte Carlo)

Fig 1: Replacing Instrument Panel (I/P) Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Trim Pad Replacement - Instrument Panel (I/P) Upper (Monte Carlo)

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the Instrument Panel Upper Trim Panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper . Remove the Left Instrument Panel Outer Trim Cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement - Left . Remove the Instrument Panel Trim Plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) (Impala) or Trim Plate Replacement - Instrument Panel (I/P) (Monte Carlo)
1	Instrument Panel Upper Trim Pad Screws (Qty 8) Tighten: 2 N.m (18 lb in)
2	Instrument Panel Upper Trim Pad Assembly

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Instrument Panel Upper Trim Pad Screws (Qty 8)

Tighten: 2 N.m (18 lb in)

Instrument Panel Upper Trim Pad Assembly