Instrument Panel (I/P) Trim Plate Replacement - (Monte Carlo)

Fig 1: Replacing Instrument Panel (I/P) Trim Plate

Courtesy of GENERAL MOTORS CORP.

Trim Plate Replacement - Instrument Panel (I/P) (Monte Carlo)

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the Instrument Panel Cluster Trim Panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) . Remove the Right Instrument Panel Outer Trim Cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement - Right .
1	Instrument Panel Trim Plate Screws (Qty 4) Tighten: 2 N.m (18 lb in)
2	Instrument Panel Trim Plate
3	Retainer Clips (Qty 3)