Instrument Panel (I/P) Upper Trim Pad Replacement - (Impala)

Fig 1: Replacing Instrument Panel (I/P) Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Trim Pad Replacement - Instrument Panel (I/P) Upper (Impala)

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the Instrument Panel Upper Trim Panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper Remove the Instrument Panel Trim Plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) (Impala) or Trim Plate Replacement - Instrument Panel (I/P) (Monte Carlo) .
1	Instrument Panel Upper Trim Pad Screw (Qty 1) Tighten: 2 N.m (18 lb in)
2	Instrument Panel Upper Trim Pad Bolt (Qty 7) Tighten: 10 N.m (88 lb in)
3	Instrument Panel Upper Trim Pad Assembly Tip: Disconnect the electrical connector.