Installation Procedure
Instrument Panel Trim Plate Applique - Right Side (2) - Install
- Instrument Panel Accessory Trim Plate Bolt @ Instrument Panel Carrier (1) - Install and tighten [6x] - Fastener Specifications
Instrument Panel Upper Trim Panel - Right Side (1) - Install
Instrument Panel Upper Trim Panel Bolt (1) - Install and tighten [6x] - Fastener Specifications
Connect the electrical connectors.
- Instrument Panel Airbag Bolt (1) - Install and tighten [3x] - Fastener Specifications
- Instrument Panel Upper Trim Panel Bolt (2) - Install and tighten [3x] - Fastener Specifications
Instrument Panel Trim Pad (1) - Install
Connect the electrical connectors.
- Instrument Panel Compartment (1) - Install
Instrument Panel Compartment Bolt (1) - Install and tighten [5x] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Lower Airbag - Passenger Side (2) - Install
- Instrument Panel Lower Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connectors.
- Instrument Panel Lower Trim Panel Insulator (1) - Install
- Install the front edge of the front floor console extension panel into the instrument panel lower trim panel insulator (1).
Instrument Panel Insulator Bolt (2) - Install and tighten [4x] - Fastener Specifications
Unlock and lower the body control module bracket (2).
- Connect the electrical connectors.
- Close and lock the body control module bracket (2) into the instrument panel lower trim panel insulator.
- Body Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
Instrument Panel Outer Trim Cover - Right Side (1) - Install
Instrument Panel Cluster Trim Plate (2) - Install
- Instrument Panel Cluster Trim Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
- NOTE:
Instrument panel steering column upper trim cover is removed for graphic clarity.
{If equipped} Connect the electrical connector (1)
Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover.
Instrument Panel Instrument Cluster Hood (1) - Install
Connect the electrical connector.
- Instrument Panel Extension (1) - Install
Connect the electrical connectors.
- Windshield Garnish Molding Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Align the retainer clips with the slots in the A pillar and press the windshield garnish moldings (1) into place.
- Windshield Garnish Molding (1) - Install [2x]
Connect and position the wiring harness.
- Instrument Panel Knee Bolster (1) - Install
Data Link Connector Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Instrument Panel Knee Bolster Bolt (2) - Install and tighten [3x] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Center Trim Pad (1) - Install
- Return the steering column to its original position.
Connect the electrical connector.
- Instrument Panel Lower Trim Panel Insulator (1) - Install
Install the tabs into the instrument panel lower trim panel insulator (1).
Instrument Panel Lower Trim Panel Insulator Retainer (1) - Install
- Instrument Panel Insulator Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Instrument Panel Insulator Nut (3) - Install and tighten [2x] - Fastener Specifications
Attach the hood primary latch release cable end retainer to the hood primary latch release cable handle (1).
Instrument Panel Outer Trim Cover - Left Side (1) - Install
Connect the electrical connector.
- Instrument Panel Lower Airbag - Driver Side (2) - Install
- Instrument Panel Lower Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connectors.
- Radio Control (2) - Install
- Radio Control Bolt (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Radio Front Trim Plate (1) - Install
Instrument Panel Radio Front Trim Plate (1) - Install
Connect the electrical connector.
- Radio Front Center Speaker (2) - Install
- Radio Front Center Speaker Bolt (1) - Install and tighten [2x] - Fastener Specifications
Radio Front Center Speaker Grille (1) - Install
- Enable the SIR System. SIR Disabling and Enabling .
- Clear DTCs
Refer to Fastener Caution .