Section 198 (Engine Mechanical - 3.6L (LF4) - Repair Instructions (3 Of 4))
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions
- Valve Rocker Arm Replacement - Right Side (Intake)
- Valve Lifter Replacement - Left Side (Exhaust)
- Valve Lifter Replacement - Left Side (Intake)
- Valve Lifter Replacement - Right Side (Exhaust)
- Valve Lifter Replacement - Right Side (Intake)
- Valve Stem Oil Seal and Valve Spring Replacement - Left Side (Exhaust)
- Valve Stem Oil Seal and Valve Spring Replacement - Left Side (Intake)
- Valve Stem Oil Seal and Valve Spring Replacement - Right Side (Exhaust)
- Valve Stem Oil Seal and Valve Spring Replacement - Right Side (Intake)
- Cylinder Head Replacement - Left Side
- Cylinder Head Replacement - Right Side
- Cylinder Head Overhaul
- Flywheel Replacement
- Automatic Transmission Flex Plate Replacement
- Crankshaft Rear Oil Seal and Housing Replacement (with MHU)
- Crankshaft Rear Oil Seal and Housing Replacement (with MG9)
- Oil Pump Replacement
- Oil Pan Replacement
- Crankshaft Oil Deflector Replacement
- Piston and Connecting Rod Removal and Installation
- Single Use Fasteners and Components
- Special Tools
- Removal Procedure
- Disassemble Procedure
- Cleaning and Inspection Procedure - Required
- Piston and Connecting Rod Assembly Procedure
- Connecting Rod Bearing Clearance Measurement Procedure - Using Plastic Gaging
- Connecting Rod Bearing Clearance Measurement Procedure - Using EN-43690-A and EN-43690-100
- Connecting Rod Final Assembly Procedure
- Installation Procedure
- Piston and Connecting Rod Overhaul