Front Fender Replacement

Fig 1: Front Fender

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS)Front Bumper Fascia Replacement (CTS-V) . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement . Remove the headlamp. Refer to Headlamp Replacement . Remove the front fender insulator. Refer to Front Fender Insulator Replacement . Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement
1	Front Fender Upper Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Fender Rear Bolt (Qty: 2) Tighten 9 N.m (80 lb in)
3	Front Fender Lower Bolt (Qty: 4) Tighten 9 N.m (80 lb in)
4	Front Fender Nut Tighten 9 N.m (80 lb in)
5	Front Fender Procedure Transfer parts as needed.