Front Fender Replacement

Fig 1: View Of Front Fender & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures If replacing the driver side fender, remove the washer bottle filler neck bolt. Refer to Windshield Washer Solvent Container Replacement . Remove the rocker panel front molding. Refer to Rocker Panel Front Molding Replacement . Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the front fender inner panel access opening. Refer to Front Fender Inner Panel Access Opening Cover Replacement . Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement . Remove the headlamp. Refer to Headlamp Replacement .
1	Front Fender Bolt (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Front Fender Nut Tighten 10 N.m (89 lb in)
3	Front Fender Bolt Tighten 10 N.m (89 lb in)
4	Front Fender Bolt Tighten 3 N.m (27 lb in)
5	Front Fender Procedure Transfer parts as needed.