Rear Seat Center Retractor Side Belt Replacement (Split Bench)

Fig 1: View Of Rear Seat Center Belt Assembly & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Removal and Installation (Avalanche/Escalade EXT) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Center Belt Assembly Cover TIP: Tilt 40 percent split forward for access.
2	Rear Seat Center Belt Retainer
3	Rear Seat Center Belt Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 52 N.m (38 lb ft)
4	Rear Seat Center Belt Assembly