LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT)

Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT)

Fig 1: View Of Rear Seat Back Cushion Cover, Pad & Components
GM1708141Courtesy of GENERAL MOTORS COMPANY
Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT)

Callout Component Name
Preliminary Procedure 
Remove the rear seat. Refer to Rear Seat Removal and Installation (Avalanche/Escalade EXT) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat) .
1 Rear Seat Back Trim Panel
Refer to Rear Seat Back Cushion Trim Panel Replacement .
2 Rear Seat Head Restraint
  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3 Rear Seat Head Restraint Guides
TIP:  Squeeze the bottom of the head restraint guide together and push up to remove.
4 Rear Seat Shoulder Belt Opening Bezel
Refer to Rear Seat Belt Opening Bezel Replacement (Avalanche/Escalade EXT) , Rear Seat Belt Opening Bezel Replacement (Tahoe/Yukon/Escalade Rear Seat No. 2) .
5 Rear Seat Back Cushion Cover
  1. Use a sharp bladed tool to carefully release the seat back cushion pad from the seat back cushion frame, the pad is glued to the perimeter of the frame.
  2. Remove the seat back cushion cover and pad as an assembly then separate as necessary.
6 Rear Seat Back Cushion Pad