Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat)

Fig 1: View Of Rear Seat Assembly & Nuts

Courtesy of GENERAL MOTORS COMPANY

Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat)

Callout	Component Name
1	Rear Seat Assembly Forward Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure  Fold the seat forward and remove the floor cover to access the nuts. Tighten  45 N.m (33 lb ft)
2	Rear Seat Assembly Rearward Nut (Qty: 4) Tighten  45 N.m (33 lb ft)
3	Rear Seat Assembly Procedure  Disconnect the electrical connector, if equipped.