Rear Seat Riser Replacement (Avalanche/Escalade EXT)

Fig 1: View Of Rear Seat Riser & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Removal and Installation (Avalanche/Escalade EXT) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat) . Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Riser Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Rear Seat Cushion Assembly
3	Rear Seat Back Bolt (Qty: 4) Tighten 9 N.m (80 lb in)
4	Rear Seat Back Cushion Frame Refer to Driver or Passenger Seat Back Cushion Frame Replacement (without HP2) , Driver or Passenger Seat Back Cushion Frame Replacement (with HP2) .
5	Rear Seat Hinge Bracket Bolts (Qty: 6) Tighten 9 N.m (80 lb in)
6	Rear Seat Hinge Bracket (Qty: 2)
7	Rear Seat Riser Procedure Disconnect the cables.