Front Seat Adjuster Replacement (without HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) . |
|
| 1 | Front Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) . |
| 2 | Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) . |
| 3 | Front Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) . |
| 5 | Front Seat Cushion Frame Nut (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 6 | Front Seat Adjuster Assembly |