Front Seat Cushion Inner Trim Panel Replacement (without HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Adjuster Inner Finish Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) .
1	Front Seat Adjuster Inner Finish Cover Procedure Disengage the bezel around the seat belt buckle. Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover. Pull outward to release the retainers from the seat assembly.

Callout

Component Name

Preliminary Procedure:
Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) .

Front Seat Adjuster Inner Finish Cover

Procedure

Disengage the bezel around the seat belt buckle.
Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover.
Pull outward to release the retainers from the seat assembly.