Seat Belt Retractor Replacement - No. 1 Rear Center (Split Bench)

Fig 1: View Of Rear Seat Center Belt Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Center Belt Assembly Cover Tip: Tilt 40 percent split forward for access.
2	Rear Seat Center Belt Retainer
3	Rear Seat Center Belt Bolt (Qty: 2) Tighten: 52 N.m (38 lb ft)
4	Rear Seat Center Belt Assembly