Rear Seat Riser Replacement (Avalanche/Escalade EXT)

Fig 1: View Of Rear Seat Riser & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Riser Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat Cushion Assembly
3	Rear Seat Back Bolt (Qty: 4) Tighten: 9 N.m (80 lb in)
4	Rear Seat Back Cushion Frame Refer to Front Seat Back Frame Replacement (with HP2) or Front Seat Back Frame Replacement (except HP2) .
5	Rear Seat Hinge Bracket Bolts (Qty: 6) Tighten: 9 N.m (80 lb in)
6	Rear Seat Hinge Bracket (Qty: 2)
7	Rear Seat Riser Procedure: Disconnect the cables.