Rear Seat Back Cushion Frame Replacement (Tahoe/Yukon/Escalade with Bucket)

Fig 1: View Of Rear Seat Back Cushion Frame, Bolts & Buckle Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove the rear seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Back Recliner Bolts (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 50 N.m (37 lb ft)
2	Rear Seat Belt Buckle Assembly
3	Rear Seat Back Cushion Frame Procedure: Transfer components as necessary.