Module Replacement - Seat Climate Control - Front Seat (Except Cadillac)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front passenger seat. Refer to Front Seat Replacement - Bucket (without HP2) or Front Seat Replacement - Bucket (with HP2) . |
|
| 1 | Passenger Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) or Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) . |
| 2 | Passenger Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (with HP2) or Front Seat Cushion Inner Trim Panel Replacement (without HP2) . |
| 3 | Passenger Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Passenger Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2) or Seat Cushion Trim Cover and Pad Replacement (without HP2) . |
| 5 | Front Seat Climate Control Module Bolt (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 6 | Front Seat Climate Control Module Tip: Disconnect the electrical connector. |