Front Seat Replacement - Bucket (with HP2)

Fig 1: View Of Front Seat Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR. Refer to SIR Disabling and Enabling . Remove the front seat adjuster covers. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Assembly Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 45 N.m (33 lb ft)
2	Front Seat Assembly Nut (Qty: 2) Tighten: 45 N.m (33 lb ft)
3	Front Seat Assembly Procedure: Disconnect the electrical connector.