Front Seat Adjuster Replacement (without HP2)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) or Front Seat Replacement - Bucket (with HP2) . |
|
| 1 | Front Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) or Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) . |
| 2 | Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (with HP2) or Front Seat Cushion Inner Trim Panel Replacement (without HP2) . |
| 3 | Front Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2) or Seat Cushion Trim Cover and Pad Replacement (without HP2) . |
| 5 | Front Seat Cushion Frame Nut (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 6 | Front Seat Adjuster Assembly |