Driver or Passenger Seat Cushion Pad Wire Replacement (2-Way, 4-Way Hybrid)

Fig 1: Driver Or Passenger Seat Cushion Pad Wire

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning WARNING: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to do so may cause the system to malfunction. Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (Oshawa 2/4/6-Way Hybrid, 6-Way Sport) . Remove the front seat tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) . Remove the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way-Power) , Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) . Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) . Remove the front seat cushion pad. Refer to Driver or Passenger Seat Cushion Pad Replacement (6-Way Hybrid) , Driver or Passenger Seat Cushion Pad Replacement (2-Way, 4-Way Hybrid) , Driver or Passenger Seat Cushion Pad Replacement (8-Way Power) . When working with the passenger seat re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References
1	Wiring Harness Fixing Point (Qty: 5)
2	Front Seat Cushion Pad Wire

Callout

Component Name

WARNING:

Refer to SIR Warning

WARNING:

To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to do so may cause the system to malfunction.

Preliminary Procedures

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (Oshawa 2/4/6-Way Hybrid, 6-Way Sport) .
Remove the front seat tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .
Remove the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way-Power) , Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) .
Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .
Remove the front seat cushion pad. Refer to Driver or Passenger Seat Cushion Pad Replacement (6-Way Hybrid) , Driver or Passenger Seat Cushion Pad Replacement (2-Way, 4-Way Hybrid) , Driver or Passenger Seat Cushion Pad Replacement (8-Way Power) .
When working with the passenger seat re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References

Wiring Harness Fixing Point (Qty: 5)

Front Seat Cushion Pad Wire