Installing the antenna amplifier
- Replace the antenna amplifier (3)
.
Parts : Antenna amplifier
- Correctly position the antenna amplifier (3) .
- Tighten down screw (2)
.TIGHTENING TORQUES SPECIFICATION
Antenna amplifier/interference suppression filter/band elimination circuit to body Screw Tightening torque 3.3 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to FASTENING REAR HEADLINING .
- Refer to INSTALLING 3RD BRAKE LIGHT TRIM .
- Refer to INSTALLING THE LEFT AND RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALLING LEFT AND RIGHT REAR SIDE TRIM PANEL .
- Refer to INSTALLING THE LEFT AND RIGHT SEATBELT FINISHER STRIP .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .