Installing the seat frame

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.

Position and fasten all mounted parts on the seat frame (1) .
Correctly position the seat frame (1) .

G14382662

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The operations shown only for one side must be carried out on both sides.

Replace screws (1) .
Parts: Screws
Tighten down screws (1) .

TIGHTENING TORQUES SPECIFICATION

Seat frame to backrest frame
Screw Replace screw.	tightening torque	44 Nm

G14382661

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE SEAT COVER WITH CUSHION FOR THE DRIVER'S SEAT .
Refer to INSTALLING THIGH SUPPORT .
Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
Refer to INSTALLING OUTER COVER ON FRONT SEAT .
Refer to INSTALLING THE HEAD RESTRAINT .
Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
Refer to AFTER CONTINUING WORK ON THE FRONT SEAT: DISCONNECTING THE FRONT SEAT FROM THE WIRING HARNESS OF THE VEHICLE AND REMOVING IT FROM THE UNIVERSAL SEAT MOUNT .
Refer to INSTALLING DRIVER'S SEAT .