Installing the seat cover with cushion for the driver's seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Insert seat cover (1) with the cushion and position.
- Attach seat cover (1) in the areas (2).
- If necessary, connect existing plug connections and clip in cable clips.
- Position holder (2) and tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Seat trim to seat frame | ||
| Sheet metal screw | tightening torque | 2.5 Nm |