Replace bumper cover, front
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
Preliminary work
- Refer to REMOVING THE NUMBER PLATE BASEPLATE FOR THE FRONT LICENSE PLATE .
- Refer to REMOVING THE FRONT HOOD SEAL .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVING FRONT BUMPER COVER .
- Refer to REMOVING CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to REMOVING THE CENTER ORNAMENTAL GRILLE .
- Refer to REMOVING LEFT AND RIGHT AIR ROUTING TRIM .
- Refer to REMOVING THE LEFT AND RIGHT RETAINING FRAME .
- Refer to REMOVING THE TRIM OF LEFT AND RIGHT BUMPER COVER .
- Refer to REMOVING ULTRASONIC SENSORS .
- Carefully detach the spoiler edge (1)
from the bumper cover.
- Remove the cover (1)
.
- Remove the wiring harness (1) .
- Replace the bumper cover (2)
.
Parts: Bumper cover
- Install the wiring harness (1)
.
- Install the cover (1)
.
- Carefully mount the spoiler edge (1)
on the bumper cover.
Follow-up work
- Refer to INSTALLING ULTRASONIC SENSORS .
- Refer to INSTALLING THE TRIM OF LEFT AND RIGHT BUMPER COVER .
- Refer to INSTALLING LEFT AND RIGHT RETAINING FRAME .
- Refer to INSTALLING LEFT AND RIGHT AIR ROUTING TRIM .
- Refer to INSTALLING CENTER ORNAMENTAL GRILLE .
- Refer to INSTALLING CENTER RADIATOR GRILLE .
- Refer to INSTALLING THE FRONT BUMPER COVER .
- Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
- Refer to INSTALLING FRONT WHEEL ARCH TRIM PANEL ON THE LEFT AND RIGHT (PARTIALLY REMOVED) .
- Refer to INSTALLING THE COVER FOR CENTRAL ENGINE COMPARTMENT .
- Refer to INSTALLING THE FRONT HOOD SEAL .
- Refer to INSTALLING THE NUMBER PLATE BASEPLATE FOR THE LICENSE PLATE AT THE FRONT .
- Refer to INSTALLING THE FRONT EMBLEM .