Install the lower B-pillar trim panel

• Remove clips remaining in the body (2)  and mount them on the B-pillar trim panel (1)  .
• Check the clips and (3)  replace them as needed.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the B-pillar trim panel (1)  and position it correctly.

  Make sure that the B-pillar trim panel (1)  is positioned correctly on the edge protection at the front and rear.

• Clip in the B-pillar trim panel (1)  into the clips (3)  .
• Clip in the B-pillar trim panel (1)  into the clips (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TOP OF THE B-PILLAR TRIM PANEL (PARTIALLY REMOVED) .
• Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
• Refer to INSTALLING THE SWITCH FOR FRONT REMOTE BACKREST RELEASE .
• Refer to INSTALLING THE BACKREST SIDE SECTION WITH THE AIRBAG .
• Refer to INSTALLING THE REAR SEAT .
• Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .
• Refer to INSTALLING THE CENTER OF THE A-PILLAR TRIM PANEL .
• Refer to INSTALLING THE SIDE COVER ON THE LEFT DASHBOARD .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .