Section 198 (Engine - Cylinder Head/Valve Cover - Repair - X5 (G05) (1 Of 4))
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- 11 12 Cylinder Head With Lid
- 11 12 101 Replace cylinder head gasket (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
- 11 12 161 replace cylinder head (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
- 11 12 161 replace cylinder head (X5 xDrive 40i 48V 2019-, X5 sDrive 40i 48V 2020-)
- 11 12 502 Disassemble and assemble cylinder head (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-, X5 xDrive 45e, 2021-)
- Removing the exhaust turbocharger (cylinder head removed)
- Mounting the cylinder head on the assembly jig
- Adjusting the eccentric shaft to the minimum lift (cylinder head removed)
- Removing the torsion springs (cylinder head removed)
- Removing all gates
- Removing all intermediate levers
- Removing the intake camshaft (cylinder head removed)
- Remove the servomotor for the eccentric shaft (cylinder head removed)
- Removing the eccentric shaft (cylinder head removed)
- Removing the exhaust camshaft (cylinder head removed)
- Remove all roller cam followers
- Removing all hydraulic valve clearance compensating elements
- Remove all valve springs
- Remove valve stem seals
- Remove all valves
- Install all valves
- Installing valve stem seals
- Install all valve springs
- Installing all hydraulic valve clearance compensating elements
- Install all roller cam followers
- Install exhaust camshaft (cylinder head removed)
- Installing the eccentric shaft (cylinder head removed)
- Installing the servomotor for the eccentric shaft (cylinder head removed)
- Installing the intake camshaft (cylinder head removed)
- Checking the intermediate lever classification
- Installing all intermediate levers
- Installing all gates
- Checking the position of the intake camshaft (cylinder head removed)
- Install the torsion springs (cylinder head removed)
- Removing the cylinder head from the assembly jig
- Installing the exhaust turbocharger (cylinder head removed)
- 11 12 729 Checking cylinder head for watertightness (Cylinder head disassembled) (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-, X5 xDrive 45e, 2021-)
- 11 12 005 Removing and installing/sealing the left cylinder head cover (X5 xDrive 50i, 2019)
- 11 12 006 Removing and installing/sealing right cylinder head cover (X5 xDrive 50i, 2019)
- 11 12 070 Remove and install/replace acoustic cover (X5 xDrive 50i, 2019)
- 11 12 105 Removing and installing the left cylinder head (X5 xDrive 50i, 2019)
- 11 12 106 Removing and installing right cylinder head (X5 xDrive 50i, 2019)
- 11 12 165 Replacing cylinder head at left (X5 xDrive 50i, 2019)
- 11 12 166 Replacing right cylinder head (X5 xDrive 50i, 2019)
- 11 12 729 Checking cylinder head for watertightness (Cylinder head disassembled) (X5 xDrive 50i, 2019, X5 M50i, 2020-)