Installing the trim on the front bumper cover laterally

NOTE: Description is for left component only. Procedure on the right side is identical.

Position the trim correctly on the front bumper cover (1) and engage at the detents (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING FOG LIGHT SUPPORT .
Refer to INSTALLING BUMPER COVER, FRONT .
Refer to INSTALLING THE FRONT PART OF THE LEFT FRONT AND RIGHT WHEEL ARCH COVER (PARTIALLY REMOVED) .
Refer to INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM (PARTIALLY REMOVED) .
Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .