Install headlight

Checking blocking of the horizontal setting 

• See US VERSION: CHECK/REPLACE THE HORIZONTAL BLOCKING SETS FOR THE HEADLIGHTS  .
• Insert and position the headlights (2).
• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Position trim panel (3).
• Install the expanding rivet (2).
• Install the seal (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the adhesive tape in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING THE FRONT PART OF THE LEFT FRONT AND RIGHT WHEEL ARCH COVER (PARTIALLY REMOVED) .
• Refer to INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM (PARTIALLY REMOVED) .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to PROCESSING THE LED HEADLIGHT SERVICE TEST MODULE .
• Refer to ADJUSTING HEADLIGHTS .
• Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .