Installing the front carpet
- Lay removed carpet on the new carpet (1) and transfer cuts to new carpet (1) .
- Cut off the highlighted area (2)
on the new carpet (1)
.
- Insert the carpet (1) in the car.
- Make sure the carpet (1) is positioned correctly at all adjacent parts and in area of heating and air-conditioning unit (2) .
Follow-up work
- Refer to INSTALLING ACCELERATOR PEDAL MODULE .
- Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE A-PILLAR, TO THE LEFT AND RIGHT .
- Refer to INSTALLING BOTH SPEAKER TRIM PIECES FOR THE CENTRAL BASS .
- Refer to INSTALLING THE BOTTOM LEFT AND RIGHT B-PILLAR TRIM PANEL .
- Refer to INSTALLING DOOR SILL COVER STRIP AT FRONT LEFT AND RIGHT .
- Refer to INSTALLING THE DOOR SILL COVER STRIP ON THE REAR LEFT AND RIGHT .
- Refer to PARTIALLY INSTALLING THE B-PILLAR TRIM PANELS AT THE TOP LEFT AND RIGHT .
- Refer to INSTALLING THE CENTER CONSOLE .
- Refer to INSTALLING RIGHT FOOTWELL TRIM .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
- Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .