Install charge air line

Check sealing ring (1) on the charge air line (3) for damage, if necessary replace with the special tool 0 496 714 (00 9 030) .
Check sealing ring (2) on the charge air line (3) for damage, if necessary replace with the special tool 0 496 714 (00 9 030) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install charge air line (4).
Lock clamp (3).
The clamp (3) must engage audibly.
Insert and install the coolant hose (2).
Lock clamp (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (3).

TIGHTENING TORQUES SPECIFICATION

Charge air line to throttle valve
M6x30	Tightening torque	8 Nm

Connect connectors (2) and lock.
The connector (2) must engage audibly.
Connect connectors (1) and lock.
The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and position auxiliary coolant pump (4).
Feed in and position retaining bracket (3).

Tighten nut (2).

TIGHTENING TORQUES SPECIFICATION

Electric coolant pump to holder
M6	Tightening torque	8 Nm

Connect connectors (1) and lock.
The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work