Installing the cover on the rear bumper cover

• Fit the cover (1) and snap it in along the dotted line at the detents (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side.
• Install the ultrasonic sensor (2) and snap it in at the detents (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install rear BUMPER PANEL .
• Install the left and right REFLECTOR .
• Install both tail lights on the SIDE PANEL .
• Install the flap in the right luggage compartment TRIM PANEL .
• Install the flap in left luggage compartment TRIM PANEL .