Install Both Tail Lights on the Side Panel

Install the tail light on the side panel 

• Check the seals (1) for damage; replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: RISK OF DAMAGE 
  Careless handling of tools and sharp-edged components. 
  Scratches, surface damage. 

  • Protect working area.
  • Handle tools and components carefully.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (2) and lock.

  The connector must engage audibly.

• Position the tail light (1).
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light to side panel
  M6x16	Tightening torque	2.5 Nm

• Align the tail light (3) so that the tail light (3) is flush with the vertical edge of the bumper panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace nuts (2).

  Parts:  Nut

• Tighten nuts (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light to side panel
  Nut M6 Replace nut.	Tightening torque	2.5 Nm

• Position the cover (1) of water channel and secure with the clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the bracket (3) of the warning triangle (1) and tighten the screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Warning triangle holder
  Screw	Tightening torque	2.7 Nm

• Install the warning triangle (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the flap in the right luggage compartment TRIM PANEL .
• Install the flap in left luggage compartment TRIM PANEL .