Installing the top air flap control/air duct

Connect the top air flap control (3) with the appropriate connector.
Feed in the top air flap control (3).
Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Air flap control/Brake ventilation duct
Oval-head screw	Tightening torque	4.0 Nm

Tighten down screws (2).

TIGHTENING TORQUES SPECIFICATION

Air flap control/Brake ventilation duct
Oval-head screw	Tightening torque	4.0 Nm

G14316445

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Install front bumper COVER .
Partly install the front sections of both front wheel arch COVER .
Partially install both front wheel arch TRIMS .
Install front ORNAMENTAL GRILLE .
Install the top left and right engine compartment COVER .
Install the front hood SEAL .