Installing the right engine mount
TIGHTENING TORQUE SPECIFICATIONS
| Right engine mount to side member | ||
|---|---|---|
| M12 | Tightening torque | 100 Nm |
- Tighten down screw (3).
TIGHTENING TORQUE SPECIFICATIONS
| Right engine mount to side member | ||
|---|---|---|
| M12 | Tightening torque | 100 Nm |
- Insert and install the coolant line (2).
- Lock holder (1).
- Make sure the holder (1) engages audibly.
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Right engine mount to cylinder head | ||
|---|---|---|
| M10 Replace screws. |
Joining torque | 40 Nm |
| Angle of rotation | 90° | |
- Insert and install the coolant line (4).
- Tighten down screw (3).
TIGHTENING TORQUE SPECIFICATIONS
| Refrigerant line to engine mount | ||
|---|---|---|
| M6 | Tightening torque | 8 Nm |
- Insert and install the partition panel (2).
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Partition panel to engine mount | ||
|---|---|---|
| screw | Tightening torque | 3 Nm |
- Insert and install a new sealing ring (1) on the coolant line (2).
- Insert and install the coolant line (4).
- Tighten down screw (3).
TIGHTENING TORQUE SPECIFICATIONS
| Connection point of intake pipe T1 to intake pipe T2 | ||
|---|---|---|
| M6X25 | Tightening torque | 8 Nm |
- Lock holder (2).
- Make sure the holder (2) engages audibly.
- Fasten the holder (1) on the coolant line (4).
- Disassemble the special tool 2 414 691 with the special tool 2 357 071 .
Follow-up work
- Refer to INSERTING FILLING HOSE OF THE WASHER FLUID RESERVOIR .
- Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .
- Refer to INSTALLING THE SERVOMOTOR FOR THE ECCENTRIC SHAFT .
- Refer to INSTALLING THE FRONT RIGHT WHEEL ARCH COVER .
- Refer to INSTALLING THE FRONT RIGHT WHEEL .
- Refer to FILLING THE AIR CONDITIONING .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .
- Refer to INSTALLING THE UPPER FIREWALL COVER PANEL .
- Refer to INSTALLING THE STRUT BRACE .
- Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .
- Refer to INSTALLING ACOUSTIC COVER .