Installing the front underbody protection
- Guide the front underbody protection (1) in under the bumper panel and position it at the screw points.
- Tighten screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Underbody protection front Screw for thermoplastic plastic Tightening torque 2.6 Nm Hexagon screw M6x20 Tightening torque 8 Nm - Equipment specification with metal underbody guard:
- Guide in and attach the underbody guard (3).
- Tighten down screws (1) and (2).TIGHTENING TORQUE SPECIFICATIONS
Underbody protection front Screw for thermoplastic plastic Tightening torque 2.6 Nm Hexagon screw M6x20 Tightening torque 8 Nm